> OUR PRODUCTS – Rudomain

OUR PRODUCTS

Company RUDOMAIN produces iron ores of the following subspecies: sinter ore, blast furnace ore, raw ore and iron ore.

Products meet the requirements of DSTU 3704.

SINTER ORE SR-1

Fe≥60%

  • Mass fraction of total iron,%, is not less than 60.0
  • Mass fraction of silicon dioxide,%, is not more than 14.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness +10 mm,%, is not more than 10.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01


SINTER ORE SR-2

Fe≥55%

  • Mass fraction of total iron,%, is not less than 55.0
  • Mass fraction of silicon dioxide,%, is not more than 21.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness +10 mm,%, is not more than 10.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

SINTER ORE SR-3

Fe≥50%

  • Mass fraction of total iron,%, is not less than 50.0
  • Mass fraction of silicon dioxide,%, is not more than 24.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness +10 mm,%, is not more than 18.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

BLAST-FURNACE ORE BO-1

Fe≥50%

  • Mass fraction of total iron,%, is not less than 50.0
  • Mass fraction of Fe2О3,% , is not less than –
  • Deviation from the mass fraction of iron,%, is ± 1
  • Mass fraction of silicon dioxide,%, is not more than 26.0
  • Mass fraction of moisture,%, is not more than 4.0
  • Fineness (maximum piece size), mm, not more than 100.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 20
  • Mass fraction of the control class of fineness +10 mm,%, is not more than –
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

BLAST-FURNACE ORE BO-2

Fe≥47%

  • Mass fraction of total iron,%, is not less than 47.0
  • Mass fraction of Fe2О3,% , is not less than –
  • Deviation from the mass fraction of iron,%, is ± 1
  • Mass fraction of silicon dioxide,%, is not more than 31.0
  • Mass fraction of moisture,%, is not more than 4.0
  • Fineness (maximum piece size), mm, not more than 100.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 20
  • Mass fraction of the control class of fineness +10 mm,%, is not more than –
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

CRUDE ORE CO

Fe≥46%

  • Mass fraction of total iron,%, is not less than 46.0
  • Mass fraction of Fe2О3,% , is not less than – 65
  • Deviation from the mass fraction of iron,%, is ± 1
  • Mass fraction of silicon dioxide,%, is not more than 25.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 80
  • Mass fraction of the control class of fineness +10 mm,%, is not more than – 20
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

CRUDE ORE CO-1

Fe≥42%

  • Mass fraction of total iron,%, is not less than 42.0
  • Mass fraction of Fe2О3,% , is not less than – 60
  • Deviation from the mass fraction of iron,%, is ±1
  • Mass fraction of silicon dioxide,%, is not more than 28.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 80
  • Mass fraction of the control class of fineness +10 mm,%, is not more than – 20
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

CRUDE ORE CO-2

Fe≥40%

  • Mass fraction of total iron,%, is not less than 40.0
  • Mass fraction of Fe2О3,% , is not less than – 56
  • Deviation from the mass fraction of iron,%, is ±1
  • Mass fraction of silicon dioxide,%, is not more than 33.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 80
  • Mass fraction of the control class of fineness +10 mm,%, is not more than – 20
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

CRUDE ORE CO-3

Fe≥38%

  • Mass fraction of total iron,%, is not less than 38.0
  • Mass fraction of Fe2О3,% , is not less than – 52
  • Deviation from the mass fraction of iron,%, is ±1
  • Mass fraction of silicon dioxide,%, is not more than 38.0
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 20.0
  • Mass fraction of the control class of fineness 0-10 mm,%, is not more than – 80
  • Mass fraction of the control class of fineness +10 mm,%, is not more than – 20
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

LOW-GRADE ORE RO

Fe≥39%

  • Mass fraction of total iron,%, is not less than 39.0
  • Deviation from the mass fraction of iron,%, is ±2
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 5000.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

LOW-GRADE ORE ​RO-1

Fe≥44%

  • Mass fraction of total iron,%, is not less than 44.0
  • Deviation from the mass fraction of iron,%, is ±2
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 5000.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

IRON ORE IO-1.1

Fe≥54%

  • Mass fraction of total iron,%, is not less than 44.0
  • Deviation from the mass fraction of iron,%, is ±2
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 5000.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

IRON ORE IO-2.2

Fe≥59%

  • Mass fraction of total iron,%, is not less than 59.0
  • Deviation from the mass fraction of iron,%, is ±2
  • Mass fraction of moisture,%, is not more than 8.0
  • Fineness (maximum piece size), mm, not more than 5000.0
  • Mass fraction of phosphorus,%, is not more than 0.01
  • Mass fraction of sulfur,%, is not more than 0.01

NEWS

“Rudomain” has become a partner of “Mudriy Tesla” children’s project

Rudomain has won an auction to acquire the mountain-concentrating combine of oxidized ores (KRMAPCOO)

Rudomain and State University of Economics and Technology (SUET) made a deal about cooperation and partnership